SciELO - Scientific Electronic Library Online

vol.48 número1A new software for dimensional measurements in 3D endodontic root canal instrumentationFixture-abutment connection surface and micro-gap measurements by 3D micro-tomographic technique analysis índice de autoresíndice de materiabúsqueda de artículos
Home Page  

Servicios Personalizados




Links relacionados

  • No hay articulos similaresSimilares en SciELO


Annali dell'Istituto Superiore di Sanità

versión impresa ISSN 0021-2571


SZABO, Bence Tamas et al. Comparative evaluation of cone-beam CT equipment with micro-CT in the visualization of root canal system. Ann. Ist. Super. Sanità [online]. 2012, vol.48, n.1, pp.49-52. ISSN 0021-2571.

The aim of this study was to compare three different cone-beam CT (CBCT) instruments used in dental clinical practice with micro-CT as gold standard. Three female monkeys’ (Macaca fascicularis) skulls were selected and scanned by the tested CBCT-s. The most apical visible root canal level on the CBCT images was used as reference level (RL). After the image acquisition by CBCT-s dental jaw sections were scanned by micro-CT at a resolution of 17 μm. Out of the left second and third molars 25 root canals were selected and analysed by three observers at RL and following cross sectional parameters were determined: area of the lumen, major and minor diameters, aspect ratio and mean thickness. Results suggest that only high resolution CBCT instruments allow dentists detecting the full length of the root canal.

Palabras clave : micro-CT; cone-beam CT; root canal morphology.

        · resumen en Italiano     · texto en Inglés     · Inglés ( pdf )