SciELO - Scientific Electronic Library Online

SciELO - Scientific Electronic Library Online

Article References

MELEO, Deborah et al. Fixture-abutment connection surface and micro-gap measurements by 3D micro-tomographic technique analysis. Ann. Ist. Super. Sanità [online]. 2012, vol.48, n.1, pp. 53-58. ISSN 0021-2571.  http://dx.doi.org/10.4415/ANN_12_01_09.

    1. Albrektsson T. A multicenter report on osseointegrated oral implants. J Prosthet Dent 1988;60:75-84. [ Links ]

    2. Oh TJ, Yoon J, Misch CE, Wang HL. The causes of early implant bone loss: myth or science? J Periodontol 2002;73:322-33. [ Links ]

    3. Quirynen M, De Soete M, van Steenberghe D. Infectious risks for oral implants: a review of the literature. Clin Oral Implants Res 2002;13:1-19. [ Links ]

    4. Coelho PG, Sudack P, Suzuki M, Kurtz KS, Romanos GE, Silva NRFA. In vitro evaluation of the implant abutment connection sealing capability of different implant systems. J Oral Rehabil 2008;35:917-24. [ Links ]

    5. McGlumpy EA, Mendel DA, Holloway JA. Implant screw mechanics. Dent Clin North Am 1998;42:71-89. [ Links ]

    6. Bickford J Jr. An introduction to the design and behavior of bolted joints. New York: Marcel Decker; 1981. [ Links ]

    7. Jorneus L. Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants 1992;7:353-9. [ Links ]

    8. Patterson EA, Johns RB. Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int J Oral Maxillofac Implants 1992;7:26-33. [ Links ]

    9. Ricomini Filho AP, FernandesFS, Straioto FG, da Silva WJ, Del BelCury AA. Preload loss and bacterial penetration on different implant-abutment connection systems. Braz Dent J 2010;21(2):123-9. [ Links ]

    10. Gratton DG, Aquilino SA, Stanford CM. Micromotion and dynamic fatigue properties of the dental implant-abutment interface. J Prosthet Dent 2001;85:47-52. [ Links ]

    11. Mangano C, Mangano F, Piattelli A, Iezzi G, Mangano A, Lacolla L. Prospective clinical evaluation of 1920 Morse taper connection implants: results after 4 years of functional loading. Clin Oral Implants Res 2009;20:254-61. [ Links ]

    12. Dibart S, Warbington M, Su MF, Skobe Z. In vitro evaluation of the implant-abutment bacterial seal: the locking taper system. Int J Oral Maxillofac Implants 2005;20:732-7. [ Links ]

    13. Weng D, Nagata MJ, Bell M, BoscoAf, de Melo LG, Richter EJ. Influence of microgap location and configuration on the periimplant bone morphology in submerged implants. An experimental study in dogs. Clin Oral Implants Res 2008;19:1141-7. [ Links ]

    14. Persson LG, Leckholm U, Leonhardt A, Dahlen G, Lindhe J. Bacterial colonization on internal surfaces of Branemark system implant components. Clin Oral Implants Res 1996;7:90-5. [ Links ]

    15. Binon PP. The effect of eliminating implant/abutment rotational misfit on screw joint. Int J Prosthodont 1996;9(6):511-9. [ Links ]

    16. Binon PP. The spline implant: design, engineering, and evaluation. Int J Prosthodont 1996;9(5):419-33. [ Links ]

    17. Binon PP. Impianti e componenti all'alba del nuovo millennio. Quintess Inter 2000;9(10); 317-30. [ Links ]

    18. Brunski JB. Biomechanics of dental implants. In: Block MS, Kent JN (Ed). Endosseus implants for maxillofacial reconstruction. Philadelphia: Sounders; 1995. [ Links ]

    19. Bianchi F, Perrotti G, Francetti L, Testori T. L'estetica in implantologia. Un caso clinico di agenesia dentale. Ital Oral Surg 2002;1(1):41-6. [ Links ]

    20. Di Carlo F, Marincola M, Quaranta A, Bedini R, Pecci R. Analisi MicroTac di impianti a connessione conometrica. Dent Cadmos 2008;76(3):1-6. [ Links ]

    21. Bedini R, Ioppolo P, Pecci R, Rizzo F, Di Carlo F, Quaranta M. Studio in vitro sulla connessione di sistemi implantari dentali. Roma: Istituto Superiore di Sanità; 2007 (Rapporti ISTISAN, 07/7). [ Links ]

    22. Broggini N, McManus LM, Hermann JS, Medina R, Schenk RK, Buser D. Peri-implant inflammation defined by the implant-abutment interface. J Dent Res 2006;85:473-8. [ Links ]

    23. Hecker DM, Eckert SE. Cyclic loading of implant-supported prostheses: changes in component fit over time. J Prosthet Dent 2003;89:346-51. [ Links ]

    24. Cibirka RM, Nelson SK, Lang BR, Rueggeberg FA. Examination of the implant-abutment interface after fatigue testing. J Prosthet Dent 2001;85:268-75. [ Links ]

    25. Berglundh T, Gotfredsen K,Zitzmann NU, Lang NP, Lindhe J. Spontaneous progression of ligature induced peri-implantitis at implants with different surface roughness: an experimental study in dogs. Clin Oral Implants Res 2007;18:655-61. [ Links ]

    26. Rack A, Rack T, Stiller M, Riesemeier H, Zabler S, Nelson K. In vitro synchrotron-based radiography of micro-gap formation at the implant-abutment interface of two-piece dental implants. J Synchrotron Rad 2010;17:289-94. [ Links ]

    27. Yi JM, Lee JK, Um HS, Chang BS, Lee MK. Marginal bony changes in relation to different vertical positions of dental implants. J Periodontal Implant Sci 2001;40:244-8. [ Links ]

    28. Hermann JS, Schoolfield JD, Schenk RK, Buser D, Cochran DL. Influence of the size of the microgap on crestal bone changes around titanium implants. A histometric evaluation of unloaded non-submerged implants in the canine mandible. J Periodontol 2001;72:1372-83. [ Links ]

    29. Jansen VK, Conrads G, Richter EJ. Microbial leakage and marginal fit of the implant-abutment interface. Int J Oral Maxillofac Implants 1997;12:527-40. [ Links ]

    30. Steinebrunner L, Wolfart S, Bossmann K, Kern M. In vitro evaluation of bacterial leakage along the implant-abutment interface of different implant systems. Int J Oral Maxillofac Implants 2005;20:875-81. [ Links ]

    31. Norton MR. Assessment of cold welding properties of the internal conical interface of two commercially available implant systems. J Prosthet Dent 1999;81:159-66. [ Links ]

    32. Gross M, Abramovich I, Weiss EI. Microleakage at the abutment-implant interface of osseointegrated implants: a comparative study. Int J Oral Maxillofac Implants 1999;14:94-100. [ Links ]

    33. Covani U, Marconcini S, Crespi R, Barone A. Bacterial plaque colonization around dental implant surfaces. Implant Dent 2006; 15:298-304. [ Links ]

    34. Quirynen M, BollenCM, Eyssen H, van Steenberghe D. Microbial penetration along the implant components of the Branemark system. An in vitro study. Clin Oral Implants Res 1994;5:239-44. [ Links ]

    35. Piattelli A, Scarano A, Paolantonio M, Assenza B, Leghissa GC, Di Bonaventura G. Fluids and microbial penetration in the internal part of cemented-retained versus screw-retained implant-abutment connections. J Periodontol 2001;72:1146-50. [ Links ]

    36. Rimondini L, Marin C, Brunella F, Fini M. Internal contamination of a 2-component implant system after occlusal loading and provisionally luted reconstruction with or without a washer device. J Periodontol 2001;72:1652-7. [ Links ]

    37. Guindy JS, BesimoCE, Besimo R, Schiel H, Meyer J. Bacterial leakage into and from prefabricated screw-retained implant-borne crowns in vitro. J Oral Rehabil 1998;25:403-8. [ Links ]

    38. Yip G, Schneider P, Roberts EW. Micro-computed tomography: high resolution imaging of bone and implants in three dimensions. SeminOrthod 2004;10:174-87. [ Links ]

    39. Bragger U. Use of radiographs in evaluating success, stability and failure in implant dentistry. Periodontol 2000 1998;17:77-88. [ Links ]

    40. Zipprich H, Weigl P, Lange B, Lauer HC. Erfassung, Ursachen und Folgen von Mikrobewegungen am implantat-abutment-interface. Implantologie 2007;15:31-46. [ Links ]

    41. Tsuge T, Hagiwara Y, Matsamura H. Marginal fit and microgaps of implant-abutment interface with internal anti-rotation configuration. Dent Mater J 2008;27(1):29-34. [ Links ]

    42. Coelho AL, Suzuki M, Dibart S, Da Silva N, Coelho PG. Cross-sectional analysis of the implant-abutment interface. J OralRehabil 2007;34:508-16. [ Links ]

    43. Hecker DM, Eckert SE, Choi YG. Cyclic loading of implant-supported prostheses: comparison of gaps at the prosthetic-abutment interface when cycled abutments are replaced with as-manufactured abutments. J Prosthet Dent 2006;95:26-32. [ Links ]

    44. Gratton DG, Aquilino SA, Stanford CM. Micromotion and dynamic fatigue properties of the dental implant-abutment interface. J Prosthet Dent 2001;85:47-52. [ Links ]

    45. Norton MR. An in vitro evaluation of the strength of a 1-piece and 2-piece conical abutment joint in implant design. Clin Oral Impl Res 2000;11:458-64. [ Links ]

    46. Watson PA. Sviluppo e produzione delle componenti protesiche: c'è bisogno di cambiamenti? Int J Prosthodont 1998;11:513-6. [ Links ]

    47. Mangano C, Mangano F, Piattelli A, Iezzi G, Mangano A, La Colla L. Prospectiveclinicalevaluation of 307 single-tooth morse taper-connection implants: a multicenterstudy. Int J Oral Maxillofac Implants 2010;25:394-400. [ Links ]

    48. Harder S, Dimaczek B, Acil Y, Terheyden H, Freitag-Wolf S, Kern M. Molecular leakage at implant-abutment connection – in vitro investigation of tightness of internal conical implant-abutment connections against endotoxin penetration. Clin Oral Invest 2009;14(4):427-32. [ Links ]

    49. Weng D, Nagata MJH, Bell M, de Melo LGN, Bosco AF. Influence of mcrogap location and configuration on peri-implant bone morphology in nonsubmerged implants: an experimental study in dogs. Int J Oral Maxillofac Implants 2010;25(3):540-7. [ Links ]

    50. Tsuge T, Hagiwara Y. Influence of lateral-oblique cyclic loading on abutment screw loosening of internal and external hexagon implants. Dent Mater J 2009;28(4):373-81. [ Links ]